All our products are now based on the new V3 CPU design
|
The KISS-BOX DMX-512 Transceiver allows you to use a standard Ethernet network to distribute the
DMX-512 protocol to any part of your system. You can configure it to behave as an external DMX
interface for a PC, Macintosh or generic lighting controller, Multiple Transceivers can be set up to work
together and distribute up to 64 universes of DMX across the network. The DMX-512 Transceiver can
be set to use the Artnet protocol.
• Sends and receives DMX-512 over Ethernet.
• Artnet compatible
• 2 independent DMX512 universes per box (one for input, one for output)
• Windows, Mac OS-X and Linux compatible
• Acts as standard DMX interface.
• Multi node DMX transmission
• Operating power over the network cable.– IEEE 802-3af
• Easy software configuration
• ACN Ready
• Ready for new HD MIDI Show Control protocol
|
 |
The DUAL RTP-MIDI Transceiver allows you to use a standard Ethernet network to distribute the
MIDI protocol to any part of your setup, whatever its size. RTP-MIDI is an open standard, supported natively by Mac OS-X (no driver to install),
and free driver is available for Windows (XP to Win8, 32 and 64 bits). And it is also compatible with iPad/iPhone over WiFi!
The DUAL RTP-MIDI is seen on these systems as a standard MIDI interface, compatible with any existing MIDI application.
The DUAL RTP-MIDI supports also Plug&Play operation, using Bonjour protocol.
An optional firmware is also available for "Simple UDP" communication modes.
• Full new 2013 design
• Full-Duplex MIDI communication over RTP-MIDI open protocol
• Two independent MIDI IN/MIDI OUT ports
• Plug&Play using Bonjour protocol
• No driver required on Mac, free driver available for Windows
• Compatible with WiFi MIDI on iPad/iPhone
• Supports multi-session with full merging
• RTP-MIDI sync accuracy : 0.1 millisecond
• Optional firmware for UDP and Peer To Peer mode
• Operating power over the network cable.– IEEE 802-3af
• Easy software configuration using KissBox Editor
• Ready for the new MMA "HD" protocol
|
 |
|
The KISS-BOX LTC & MTC Transceiver allows you to use a standard Ethernet network to distribute
Smpte LTC
Time-code and MTC Midi Time-code to any part of your system. You can configure it to
behave as a standard Time-code and MIDI interface for a PC running Windows, or a Macintosh
with OS-X, or set it up to “Pipeline” LTC and/or MTC Midi across the network in Peer-to-Peer mode.
An SDK package will be available for other operating systems and protocols
• Sends and receives Smpte LTC Time-code and MTC Midi Time-code over Ethernet.
• Reads and writes EBU/Smpte LTC at 30 - 29.97 - 25 - 24 fps
• RTP – real-time MIDI
• 16 MIDI channels
• Windows, Mac OS-X and Linux compatible
• Acts as standard MIDI / Smpte interface.
• Peer-to-Peer Time-code transmission
• Operating power over the network cable.– IEEE 802-3af
• 100 Base-T network compliant
• Easy software configuration
• ACN Ready
• Ready for the new MMA "HD" protocol
|
 |
|
The KISS-BOX I/O3 CardCage can hold up to 3 standard Kiss-Box I/O
Cards. Input signals received on input cards will be translated to Ethernet
UDP/IP or TCP/IP and send to the network.
Network messages received
from the network are translated to output signals on the selected
output
cards. Any compliant 3th party software can be used to process these
messages and thus "read" or "write" standard in and outputs (like relays,
contact-closures, analog signals) via a
standard Ethernet network.
A range of I/O cards is available.
If configured to use the Artnet protocol
the I/O3 CardCage can be used to control the cards with DMX-512
• 3 slots hold up to 24 versatile in and/or outputs
• Easy IP (TCP or UDP) control
• Controllable with DMX-512 over Ethernet. (with Artnet Firmware)
• Windows, Mac OS-X and Linux compatible
• Operating power over the network cable.– IEEE 802-3af
• 100 Base-T network compliant
• Easy software configuration
• ACN Ready
|
 |
|
The KISS-BOX I/O8 CardCage can hold up to 8 standard Kiss-Box I/O
Cards. Input signals received
on input cards will be translated to Ethernet
UDP/IP or TCP/IP and send to the network.
Network messages received
from the network are translated to output signals on the selected output
cards. Any compliant 3th party software can be used to process these
messages and thus "read" or "write" standard in and outputs (like relays,
contact-closures, analog signals) via a standard Ethernet network. A
range of I/O cards is available. If configured to use the Artnet protocol the
I/O3 CardCage can be used to control the cards with DMX-512
• 8 slots hold up to 24 versatile in and/or
outputs
• Easy IP (TCP or UDP) control
• Controllable with DMX-512 over Ethernet.
(with Artnet Firmware)
• Windows, Mac OS-X and Linux
compatible
• Operating power over the network cable.
– IEEE 802-3af
• 100 Base-T network compliant
• Easy software configuration
• ACN Ready
|
 |
The Dual Serial KISS-BOX allows you to control serial devices through a network, making
it possible to manage them from distant computers. Each port of the Dual Serial KISSBOX
is fully independent and can be configured as RS232, RS422 or RS485. Two Dual
Serial KISS-BOX can work in Peer-to-Peer mode to transport serial data across an
Ethernet network without the use of computers.
The Dual Serial can also be programmed to run proprietary serial protocols (like MODBUS). The protocols can be integrated by KissBox or by yourself, using
the SDK/development chain available from Kiss-Box.
• New product (2013)
• Sends and receives Serial data over Ethernet.
• High performance serial port handling with 1024 bytes FIFOs
• SDK and free development chain available for proprietary protocol implementation
• RS-232, RS-422 & RS-485 selectable per port, by software
• Baud rate, Start & Stop bit, # data bits & parity programmable per port
• Peer-to-Peer Serial data transmission
• Operating power over the network cable.– IEEE 802-3af
• Platform Independent
• 100 Base-T network compliant
• Easy software configuration
|
 |
Note: this product is currently being redesigned in order to fulfill FCC/UL rules. Please contact us for a replacement solution.
The KISS-BOX Switch-POE is a 4 port unmanaged ethernet switch with build-in Power
Over Ethernet
power supply.
POE technology allows the Kiss-Boxes to receive power as
well as data over existing
LAN cabling. Kiss-Boxes can
be shut-down or reset remotely -
no need for a power switch.
The mains power transformer and switch are integrated
in
1 single Kiss-Box form-factor housing.
The Switch-POE is designed to be used with 4 Kiss-
Box units in one
19" rack-mount bracket
• 85 to 230 VAC - Auto sensing
• Power & Network for up to 4 KISS-BOX units
• IEEE802.3af compliant
• Allows for centralized power backup
• 100 Base-T network compliant
• No configuration
|
 |
|
The QConductor EZCC is a set of VST plugins, designed to perform Show Control related operations directly from any VST host, like a DAW or sequencer.
• VST2.4 plugins, available for Mac/Windows in 32 bits (64 bits versions under development)
• Designed to control DMX, I/O, Serial and MIDI Kiss-Box interfaces from a Digital Audio Workstation or sequencer
• Up to 128 cues callable by MIDI Program Change
• Real-time control on output channels by MIDI Control Change
• Input control available in option (transforms incoming data into MIDI messages for the VST host)
• Compatible with all major DAW/sequencer softwares (tested with Max/MSP, Reaper, Ableton Live, Cubase)
• Optimized to be used under Max/MSP with the vst~ object
|
 |
|
 |
|
